| Product | Cure
System | Cure
Time / C° | Duro. | Tensile | Elong. | Tear | Rheology | Spec. Gravity | MSDS | Comments |
|
CAT-01
| Non-curing | | | | | |
| |
| Polymerization Catalyst |
|
CAT-02
| Non-curing | | | | | |
| |
| Polymerization catalyst |
|
CAT-07
| Non-Curing | | | | | |
680 cP
| |
| Polymerization Catalyst |
|
MED-1000
| Acetoxy | 72 h / R.T., H. | 25 | 1300 | 775 | 75 |
| 1.08 |
| Self-Leveling |
|
R-1001
| | | | | | |
| |
| VM&P Naphtha |
|
R-1002
| | | | | | |
3 cSt
| 0.95 |
| Dimethly Cyclic |
|
R-1005
| Non-Curing | | | | | |
| |
| 99.5% D4 Content |
|
R-1007
| Oxime | 7 D / 25 | 30 | | | |
| 1.52 |
| Thermal control Coating / Marking Ink |
|
R-1008
| | 7 d / R.T, H. | | | | |
1.2k
| |
| Available in translucent, white, black, red, orange, yellow, green, blue, violet |
|
R-1009
| Oxime | 7 D / R.T. | 45 | 1150 | 650 | 95 |
6.2k cP
| 1.10 |
| RTV Dispersion Coating / Conformal, 32% Solids |
|
MED-1011
| Acetoxy | < 10 m | 25 | 1400 | 750 | 100 |
100 g/min
| 1.12 |
| Flowable |
|
CAT-102
| Non-curing | | | | | |
| |
| Peroxide catalyst masterbatch |
|
XL-103
| Non-Curing | | | | | |
200 cP
| 0.97 |
| Methylhydrogen dimethylsiloxane Low H |
|
MED-1031
| Oxime | 7 D / R.T. | 35 | 1075 | 400 | 80 |
0.5
| 1.11 |
| No Acidic Leaving Group |
|
MED-1037
| Acetoxy | 3 D / R.T. | 25 | 625 | 550 | |
0.75
| 1.07 |
| Non-Slump, Thixotropic |
|
MED-1055
| Acetoxy | 72 H, R.T. | 35 | 820 | 400% | 50 |
| 1.35 |
| Solvent resistant |
|
R3-1075
| Oxime | 7 D / R.T. | 40 | 700 | 350 | 40 |
3.3k cP
| 1.06 |
| RTV Dispersion Coating / Conformal, 60% Solids |
|
R-1082
| Acetoxy | 5 D / R.T., H | 25 | 1425 | 950 | 125 |
700
| 1.09 |
| Ice Phobic; One-Part, 20% Solids |
|
XL-110
| Non-Curing | | | | | |
4 cP
| 0.97 |
| Methylhydrogen dimethylsiloxane High H |
|
XL-112
| Non-Curing | | | | | |
40 cP
| 0.97 |
| Methylhydrogen dimethylsiloxane Medium H |
|
R-1130
| Oxime | 7 D / R.T. | 35 | 850 | 325 | 40 |
0.5
| 1.10 |
| RTV Adhesive |
|
MED-1131
| Oxime | 7 D / R.T. | 35 | 1075 | 400 | 80 |
0.5
| 1.11 |
| No Acidic Leaving Group |
|
MED-1137
| Acetoxy | 3 D / R.T. | 25 | 625 | 550 | |
0.75
| 1.07 |
| Non-Slump, Thixotropic |
|
MED12-1137
| Acetoxy | 72 H / R.T. | 25 | 650 | 525 | |
1
| 1.18 |
| White adhesive |
|
R-1140
| Acetoxy | 7 D / R.T. | 30 | 600 | 350 | 40 |
| 1.08 |
| RTV Adhesive |
|
R2-1140
| Acetoxy | 7 D / R.T. | 25 | 200 | 325 | 20 |
| 1.03 |
| RTV Adhesive |
|
R4-1140
| Acetoxy | 3 D / R. T. | 25 | 1400 | 750 | 100 |
2
| 1.12 |
| RTV Adhesive |
|
CV-1142
| Oxime | 7 d / R.T., H | 45 | 700 | 300 | |
| 1.11 |
| Great for Spot Bonding, Available in Black & White |
|
CV1-1142
| Oxime | 7 D / R.T. | 30 | 400 | 200 | |
13k
| |
| Self-leveling, Available in Black & White |
|
CV1-1142
| Oxime | 7 D / R.T. | 30 | 400 | 200 | |
60
| |
| Self-leveling, Available in Black & White
NGC Specification C600080 |
|
CV2-1142
| Oxime | 7 d / R.T., H | 50 | | | |
| |
| Non-Slump, Available in Black & White |
|
CV3-1142
| Oxime | 7 d / R.T., H | 45 | 675 | 300 | |
| 1.11 |
| Great for Spot Bonding, Available in Black & White |
|
CV9-1142
| Oxime | 7 d / R.T., H | 55 | 400 | 85 | |
| 0.82 |
| High Durometer, Low Density |
|
CV7-1142-1
| Oxime | 7 d / R.T., H | 40 | 700 | 300 | 60 |
| 1.13 |
| Non-Slump, Non-Corrosive |
|
CV1-1142-4
| Oxime | 7 D / R.T. | 35 | 400 | 200 | |
60
| 1.05 |
| Self-leveling, Built-in UV Tracer
NGC Specification C600080 |
|
CV1-1142-4
| Oxime | 7 D / R.T., H | 35 | 350 | 200 | |
60
| |
| Self-leveling, Built-in UV Tracer |
|
CV-1143
| Oxime | 7 d / R.T., H | 45 | 800 | 400 | |
| 1.10 |
| Non-Slump, Non-Corrosive |
|
CV-1144-0
| Oxime | 7 d / R.T., H | | | | |
240 cP
| 1.00 |
| 60% Solids, Atomic Oxygen Protective Overcoat |
|
CV1-1144-0
| Oxime | 7 d / R.T., H | | | | |
850 cP
| 1.11 |
| 50% Solids |
|
CV3-1144-1
| Oxime | 7 d / R.T., H | | | | |
900 cP
| |
| 60% Solids, White Overcoat |
|
CV-1146-2
| Oxime | 7 d / R.T., H | | | | |
2.4k cP
| 1.26 |
| 72% Solids, Black |
|
CV2-1147
| Oxime | 7 d / R.T., H | | | | |
2k cP
| 1.12 |
| 60% Solids, Non-blocking Overcoat |
|
CV-1148
| Oxime | 7 d / R.T., H | | | | |
7.5k
| 1.34 |
| 70% Solids |
|
CV1-1148
| Oxime | 7 D / R.T. | | | | |
6k cP
| 1.06 |
| 40% Solids
NGC Specification C843757 |
|
CV1-1148
| Oxime | 7 d / R.T., H | | | | |
5k cP
| 1.07 |
| 40% Solids |
|
CV2-1148
| Oxime | 7 d / R.T., H | | | | |
| 1.07 |
| Non-Slump, Black |
|
CV-1152
| Oxime | 7 d / R.T., H | | | | |
7.3k cP
| 1.01 |
| 100% Solids, Protective Overcoat |
|
CV-1161
| | 2 h / 60 | | | | |
3k
| |
| 50% Solids, 7.5 ppi Release Force |
|
CV2-1161
| Peroxide | 20 m / 60 then 20 m / 175 | | | | |
770
| |
| 35% Solids, 2.5ppi Release Force |
|
CV3-1161
| | 20 m / 85 then 20 m / 175 | | | | |
1.2k
| |
| Pressure Sensitive Silicone Adhesive |
|
CV4-1161-5
| | | | | | |
| |
| 0.005 inches (5 microns) Double Side Tape, Kapton® Center, 2.5 ppi |
|
CV4-1161-5
| | | | | | |
| |
| 0.005 inches (5 microns) Double Side Tape, Kapton® Center, 2.0 ppi
NGC Specification C878374 |
|
R-1182
| | | | | | |
| |
| Provides a RTV, low-friction coating
on cured silicone substrates |
|
SP-120
| Non-curing | | | | | |
1 cP
| 0.77 |
| General Purpose |
|
SP-121
| Non-Curing | | | | | |
1 cP
| 0.76 |
| General Purpose Primer |
|
SP-121
| Non-curing | | | | | |
1 cP
| 0.78 |
| General Purpose Primer
NGC Specification QFM-0433 |
|
SP-124
| Non-curing | | | | | |
1 cP
| 0.79 |
| Condensation Cure Systems, 9% Solids |
|
LS-1246
| Non-curing | | | | | |
| |
| Thixotropic optical silicone grease |
|
LS-1249
| | Non-curing | | | | |
| 1.10 |
| Thixotropic optical silicone grease |
|
XL-128
| Non-Curing | | | | | |
| |
| Inhibitor, Methyl Butynol |
|
CF1-135
| Hydrolysis | 30 Min R.T., 50% H | | | | |
| |
| Addition cure systems |
|
CF2-135
| Non-Curing | | | | | |
1 cP
| |
| Addition Cure Systems, 4.6% Solids
NGC Specification 960119 |
|
CF2-135
| Non-Curing | | | | | |
1 cP
| 0.77 |
| Addition Cure Systems, 4.5% Solids |
|
CF6-135
| Hydrolysis | 30 Min, R.T., 50% H. | | | | |
| .78 |
| Addition cure system |
|
SP-135
| Non-Curing | | | | | |
1 cP
| 0.77 |
| Addition cure system |
|
CF1-136
| Hydrolysis | 30 Min. R.T., 50% H | | | | |
| |
| Addition cure systems |
|
CF6-136
| Hydrolysis | 30 Min, R.T., 50% H. | | | | |
| .78 |
| Addition cure system |
|
SP-136
| Non-curing | | | | | |
| 0.77 |
| Addition cure system |
|
CF2-137
| Non-Curing | | | | | |
| 0.77 |
| Addition Cure, UV Tracer |
|
DDR-1370
| see product profile | | | | | |
1.4k
| |
| cohesive PSA dispersed in solvent |
|
R-1400
| Platinum | 1 H / 150 | 19 | 825 | 750 | 110 |
400k cP
| 1.18 |
| Low durometer, Non Flowable, One-Part Elastomer |
|
CF1-141
| Non-Curing | | | | | |
1 cP
| 0.80 |
| Addition Cure, IPA Solvent |
|
SP-142
| Non-curing | | | | | |
1 cP
| 0.79 |
| Polycarbonate Adhesion |
|
SP-144
| Non-curing | | | | | |
| 0.87 |
| Addition cure systems |
|
SP-145
| Non-curing | | | | | |
1.05 cP
| 1.06 |
| Improves adhesion to various substrates |
|
SP-145-3
| Non-curing | | | | | |
1.05 cP
| 1.06 |
| Improves adhesion to various substrates |
|
XL-150
| Non-Curing | | | | | |
11 cP
| 0.97 |
| Methylhydrogen Fluorosiloxane High H |
|
CV-1500
| Oxime | 7 D / R.T. | 75 | 675 | 20 | |
0
| 1.25 |
| 3.5 ohm-cm, 0.32 W/mK, Primed Lap Shear 350psi (2.4 Mpa)
NGC Specification C816529 |
|
CV-1500
| Oxime | 7 d / R.T., H | 80 | 650 | 20 | |
| 1.25 |
| 3.5 ohm-cm, Primed Lap Shear 325psi (2.2 Mpa) |
|
R-1505
| Oxime | 7 D / R.T. | 75 | 550 | 20 | |
| 1.24 |
| Static Dissipation, 30 ohm-cm |
|
MED-1511
| Acetoxy | 72 h / R.T. | 25 | 1400 | 750 | 100 |
| 1.12 |
| Flowable |
|
MED-1555
| Acetoxy | 72 H / R.T. | 35 | 820 | 400 | 50 |
| 35 |
| Solvent resistant |
|
MED-160
| Non-curing | | | | | |
1 cP
| 0.77 |
| General Purpose Primer |
|
R-1600
| Oxime | 7 D / R.T. | 45 | 650 | 300 | 60 |
| 1.10 |
| Low/High Temperature, RTV |
|
MED1-161
| Non-curing | | | | | |
1 cP
| 0.77 |
| Primer for Platinum-cured Systems |
|
MED2-161
| Non-curing | | | | | |
1
| 0.77 |
| Designed for use with platinum cure systems |
|
MED6-161
| Non-curing | | | | | |
1
| 0.78 |
| Primer for platimum-cure systems |
|
MED-162
| Hydrolysis | 30 M / R.T., 50% H. | | | | |
1 cP
| 0.79 |
| Primer for Platinum Systems |
|
MED-163
| Hydrolysis | 30 M / R.T., 50% H. | | | | |
1 cP
| 0.80 |
| Primer for Platinum Systems |
|
MED-164
| Hydrolysis | 30 Min R.T., 50% H. | | | | |
1 cP
| 0.79 |
| Designed for use with condensation cure silicones |
|
MED-165
| Non-curing | | | | | |
1
| 0.77 |
| Designed for use with platinum-cured systems |
|
MED-166
| Non-Curing | | | | | |
2.0 cP
| .80 |
| Designed for use with platinum-cured systems |
|
MED-2000
| Acetoxy | 72 h / R.T. | 25 | 1300 | 775 | 75 |
| 1.08 |
| Self-Leveling |
|
MED-2014
| Platinum | 1* | 35 | 1800 | 800 | 185 |
3.4k cP
| 1.10 |
| One Part, in Xylene |
|
SP1-204
| Non-Curing | | | | | |
| .79 |
| 1 & 2 Part RTV System. 3.3 % S. |
|
MED-2045
| Platinum | 10 M / 171 | 40 | 1525 | 800 | 200 |
95
| |
| 3-Part |
|
R-2100-2
| Addition | 5 m / 150°C | | | | |
A:800/B:2.8k
| |
| Black ink, various applications |
|
R-2140
| Platinum | 5 m / 177°C | 40 | 850 | 320 | 150 |
A:12k/B:270
| 1.09 |
| Adhesive, encapsulating compound or mold-making material |
|
R-2145
| Platinum | 2 H / 65 | 45 | 1050 | 400 | 150 |
280
| 1.17 |
| Extremely Tough, Fast Cure Elastomer |
|
R1-2145
| Platinum | 2 h / 65 | 45 | 1000 | 400 | 190 |
| 1.16 |
| Adhesive for bonding and
sealing silicones to each
other and other substrates
such as metals and plastics |
|
R-2160
| Platinum | 30 M / 150 | 20 | 750 | 625 | 150 |
A:250k/B:650 cP
| 1.20 |
| High Temperature Elastomer |
|
R3-2160
| | 15 m / 150 | 35 | 550 | 525 | 130 |
| 1.18 |
| High temp adhesive/sealant, primed lap shear 200 psi |
|
MED-2174
| Peroxide | 5 M / 116 | 50 | 1200 | 775 | 225 |
105
| 1.15 |
| Peroxide |
|
R-2180
| Platinum | > 30 m R.T., H | 40 | 1700 | 1050 | 300 |
3.1k cP
| |
| Ice Phobic; Tough silicone dispersion |
|
R-2180-2
| Platinum | See Comments | 45 | 1650 | 1000 | 300 |
3.3k
| |
| Ice Phobic; Cure: 30 M / 25 °C : 45 M / 75 °C : 135 M / 150 °C, 20% Solids |
|
R-2182
| | 5 m / 150 | | | | |
| 0.96 |
| Low coefficient of friction silicone coating |
|
R-2183
| | ramp cure | 35 | 1550 | 800 | 175 |
850 cP
| |
| For dip casting and heat-curing of thin elastomeric films |
|
CF13-2186
| Platinum | 15 M / 150 | 20 | 550 | 500 | |
| 1.07 |
| Low Viscosity, Fast Cure |
|
CF15-2186
| Platinum | 1 D / R.T. | 25 | 1200 | 625 | 100 |
A:80k/B:50k
| A:1.12/B:1.11 |
| Short Work Time, Fast Cure Elastomer |
|
CF16-2186
| Platinum | 60 M / 100 | 30 | 1175 | 550 | 80 |
70k cP
| 1.10 |
| Medium Work Time, Fast Cure Elastomer |
|
CF18-2186
| Platinum | 15 M / 150 | 17 | 650 | 575 | |
A:23k/B:18k
| |
| Non-corrosive |
|
CF19-2186
| Platinum | 30 M / 150 | 25 | 1100 | 600 | 80 |
A:85k/B:65k cP
| 1.11 |
| Longer Work Time, Soft Duro |
|
CF2-2186
| Platinum | 10 M / 150 | 20 | 800 | 600 | 90 |
| 1.10 |
| Medium Viscosity |
|
CF20-2186
| Platinum | 60 M / 100 | 30 | 1100 | 600 | 80 |
A:80k/B:50k
| 1.10 |
| Longer Work Time |
|
R-2186
| Platinum | 15 M / 150 | 30 | 1100 | 500 | 80 |
| 1.12 |
| All Purpose High Tear Elastomer |
|
R28-2186
| Platinum | 30 m / 150C | 25 | 1150 | 650 | 75 |
| 1.12 |
| Non slumping, easy application |
|
R31-2186
| Platinum | 1 D / R.T. | 20 | 1000 | 775 | 125 |
82k cP
| 1.12 |
| Flowable, Fast Cure Adhesive |
|
R32-2186
| Platinum | 15 M / 150 | 15 | 975 | 850 | 125 |
80k cP
| 1.12 |
| Flowable, Longer Work time, Fast Cure Adhesive |
|
R33-2186
| Platinum | 24 h / R.T., h | 20 | 1,000 | 725 | 150 |
83.5k cP
| 1.12 |
| Flowable, Longer Work Time, Adhesive |
|
R34-2186
| Platinum | 15 M / 120 | Type A 48 | 830 | 340 | |
| 1.09 |
| Adhesive for bonding and sealing silicones |
|
R33-2186-1
| | 24 H / R.T., H | 20 | 1,000 | 740 | 135 |
80k cP
| 1.12 |
| Two-part, white, thixotropic, high tear strength silicone system |
|
R-2186-2
| Platinum | 15 M / 150 | 35 | 1050 | 500 | 100 |
| 1.15 |
| All Purpose High Tear Elastomer-Black |
|
CV-2187
| Platinum | 15 m / 150 | 35 | 925 | 400 | 75 |
90k cP
| 1.10 |
| Tough, Flowable, Fast Cure Elastomer |
|
R-2187
| Platinum | 2 HR / 70 | Type A 42 | 790 | 175 | 50 ppi |
23k cP
| 1.12 |
| Enhanced performance in extreme temperatures |
|
R-2188
| Platinum | 30 m / 150 | 20 | 475 | 350 | |
A:13.5k/B:9k cP
| 1.05 |
| Low Viscosity, Low Modulus Elastomer |
|
CV-2189-2
| Platinum | 15 m / 200 | 17 | 750 | 700 | 50 |
225k
| 1.15 |
| Non-Flowable |
|
R-2200-11
| Platinum | 30 / 150 | 60 | 800 | 135 | 100 |
A:140k/B:3k
| 1.24 |
| Casting, Creating Molds |
|
MED-2214
| Platinum | 1* | 35 | 1800 | 800 | 185 |
3.4k cP
| 1.10 |
| One Part, in Xylene |
|
MED-2245
| Platinum | 10 M / 171 | 40 | 1525 | 800 | 200 |
95
| |
| 3-Part |
|
CV-2287
| Platinum | 30 m / 150 | 30 | 725 | 400 | 55 |
85k cP
| 1.11 |
| Low/High Temperature, Flowable, Fast Cure Elastomer |
|
CV-2289
| Platinum | 15 m / 150 | 30 | 750 | 350 | |
| |
| Tough, High Temperature Resistant Elastomer |
|
CV-2289-1
| Platinum | 15 m / 150 | 30 | 700 | 350 | |
A:60k/B:40k cP
| |
| Tack-Free 4 Hrs Max, Work Time 30 Min, Pourable Elastomer |
|
CV1-2289-1
| Platinum | 15 m / 150 | 25 | 650 | 325 | 35 |
A:65k/B:40k cP
| 1.10 |
| Primed Lap Shear 400 psi (2.8 Mpa) |
|
CV2-2289-1
| Platinum | 4 h / 65 | 30 | 450 | 250 | |
A:14k/B:10.5k cP
| |
| Low Viscosity, Primed Lap Shear 300 psi (2.47 Mpa) |
|
CV3-2289-1
| Platinum | 7 d / R.T. | 35 | 175 | 125 | |
A:15k/B:14k cP
| |
| Low Viscosity, Added Micro Balloons for Bond Line Control |
|
CV3-2289-1
| Platinum | 7 D / R.T. | 30 | 175 | 125 | |
A:15k/B:14k cP
| |
| Low Viscosity, Added Micro Balloons for Bond Line Control
NGC Specification 960473 |
|
CV4-2289-1
| Platinum | 30 m / 150 | 30 | 650 | 400 | |
A:1300k/B:1000k cP
| |
| Low modulus |
|
CV7-2289-1
| Platinum | 15 m / 150 | 30 | 700 | 375 | |
A:57.5k/B:400k cP
| |
| Primed Lap Shear 350 psi (2.4 Mpa) |
|
CV-2289-2
| Platinum | 15 m / 150 | 30 | 750 | 400 | 50 |
A:65k/B:40k cP
| |
| Pourable elastomer |
|
R-2350
| Platinum | 45 M / 100 | | | | |
A:28k/B:13k cP
| 0.35 |
| Flame Resistant, 22 lbs/ft3 (0.35 g/cm3) |
|
SFM5-2350
| Platinum | 2 H / R.T. | | | | |
A:55k/B:45k cP
| 0.35 |
| Flame Resistant, 25 lbs/ft3 (0.40 g/cm3) |
|
R1-2354
| Platinum | 10 M / R.T. | | 100 | | |
A:270k/B:260k cP
| 0.45 |
| High Strength/Soft, 40 lbs/ft3 (0.64 g/cm3) |
|
R-2356
| Platinum | 45 M / 100 | | | | |
A:4.1k/B:5.3k cP
| 0.35 |
| Flame Resistant, 28 lbs/ft3 (0.44 g/cm3) |
|
R-2356
| Platinum | 45 M / 100 | | | | |
A:4.1k/B:5.3k cP
| 0.35 |
| Flame Resistant, 28 lbs/ft3 (0.44 g/cm3)
NGC Specification QFM-0061 |
|
R-2370
| Tin Condensation | 10 M / R.T. | | | | |
4.7k cP
| |
| Low Density/Soft, 10 lbs/ft3 (0.16 g/cm3) |
|
R-2380
| Tin Condensation | 10 M / R.T. | | | | |
3.6k cP
| |
| Low Density/Soft, 18 lbs/ft3 (0.30 g/cm3) |
|
CV-2391
| Platinum | 60 m / R.T., H | | | | |
3k
| |
| Low medium density foam, 14lb/ft3 (0.224 g/mL) |
|
EPM-2401
| Non-Curing | | | | | |
| 2.30 |
| Thermally conductive, white silicone grease 0.49 W/mK |
|
EPM-2410
| Platinum | 15 M / 150 | 30 | 675 | 350 | |
A:62k/B:40k cP
| |
| Ideal for Static Mix and Dispense Applications |
|
EPM-2410-1
| Platinum | 15 M / 150 | 30 | 700 | 350 | |
A:60k/B:40k cP
| |
| White |
|
EPM-2410-2
| Platinum | 15 M / 150 | 30 | 750 | 400 | |
A:65k/B:40k cP
| |
| Black |
|
EMP-2411-2
| | | | | | |
| |
| |
|
EMP-2411-2
| | | | | | |
| |
| |
|
EPM-2411-2
| Platinum | 15 M / 200 | 17 | 750 | 700 | 55 |
300k cP
| 1.16 |
| Shear Thinning Index 2.5 |
|
EPM-2420
| Platinum | 60 M / 65 | 28 | 400 | 150 | |
2.6k cP
| 1.01 |
| Primerless Adhesion |
|
EPM-2421
| Platinum | 15 M / 150 | 50 | 850 | 90 | |
A:3.8k/B:2.7k cP
| |
| Two-part, optically clear silicone |
|
EPM-2422
| Platinum | 4 H / 65 | 40 | 650 | 100 | |
3.6k cP
| 1.04 |
| 1.43 Refractive Index, Low/high Temperature, Primed Lap Shear 160 psi (1.1 Mpa) |
|
EMP-2423
| Platinum | 15 m / 150 | 50 | 1,000 | 125 | |
8k cP
| 1.02 |
| For electronic applications requiring low volatility to avoid condensation in sensitive devices |
|
EPM-2423
| Platinum | 15 m / 150 | 50 | 1000 | 125 | |
8k cP
| 1.02 |
| Legacy material used for adhering solvent cells to composite substrates. |
|
EPM-2423-2
| | 30 M / 150 | 50 | 950 | 150 | |
8.5k cP
| |
| An embedding or potting compound for environmental protection of electronic
assemblies and components |
|
EPM-2461
| Platinum | 24 H / R.T. | 30 | 500 | 350 | 30 |
A:1250k/B:100k cP
| |
| Two-part, static dissipative silicone |
|
EPM-2462
| Platinum | 30 M / 150 | 85 | 525 | | |
| 3.39 |
| Modulus 1400 psi (9.7 Mpa) |
|
EPM-2463
| Tin Condensation | 7 D / R.T. | 80 | 300 | 75 | 55 |
4
| 3.4 |
| Remains Conductive at High Temperature, 0.002 ohm-cm, 1.5 W/mK |
|
EPM-2480
| Platinum | 30 M / 150 | | | | |
2.5k cP
| |
| Two-part, clear silicone gel. For applications requiring low volatility. |
|
EPM-2481
| Platinum | 30 M / 150 | | | | |
A:16k/B:8.5k cP
| |
| Penetration 4 mm, 1.40 Refractive Index |
|
EPM-2482
| Platinum | 40 M / 150 | | | | |
1.8k cP
| |
| Low/High Temperature, Penetration 2 - 4 mm, 1.43 Refractive Index |
|
EPM-2490
| Platinum | 7 D / RTV | 75 | 190 | 30 | 45 |
300k cP
| 1.53 |
| Bulk Thermal Conductivity 1.25 W/mK |
|
EPM-2491
| | 4 h / 65 | 75 | 250 | 55 | 55 |
900k cP
| 1.45 |
| Low outgas, thermally conductive |
|
EPM-2492
| Platinum | 30 m / 150 | 75 | 275 | 40 | |
300k cP
| |
| Two-part, white, thermal interface silicone system, 0.62 W/mK |
|
EPM-2495
| | 30 m / 150 | 55 | 400 | 225 | 55 |
| |
| 0.64 W/(mK) |
|
CV-2500
| Platinum | 15 m / 150 | 50 | 1000 | 125 | |
8k
| 1.02 |
| Pourable, Primed Lap Shear 400 psi (2.8 Mpa) |
|
CV10-2500
| Platinum | 15 m / 150 | 50 | 1000 | 130 | |
7.5k cP
| 1.02 |
| 1:1 Mix Ratio |
|
CV14-2500
| Platinum | 60 m / 65 | 30 | 425 | 150 | |
2.6k cP
| 1.01 |
| Primerless Adhesion |
|
CV15-2500
| Platinum | 15 m / 150 | 50 | 850 | 90 | |
A:3.8k/B:2.7k cP
| 1.02 |
| Primed Lap Shear 225 psi (1.6 Mpa) |
|
CV16-2500
| Platinum | 4 h / 65 | 40 | 650 | 100 | |
3.6k cP
| 1.04 |
| Low/high Temperature, Primed Lap Shear 200 psi (1.4 Mpa) |
|
CV3-2500
| Platinum | 30 m / 150 | | 950 | 100 | |
3k cP
| 1.02 |
| Low Viscosity |
|
CV4-2500
| Platinum | 60 m / 65 | 25 | | | |
1.5k cP
| |
| Low Durometer |
|
CV-2500-2
| Platinum | 30 m / 150 | 50 | 950 | 150 | |
8.5k cP
| 1.05 |
| Low Viscosity, Fast Cure Elastomer, Black |
|
CV-2502
| Platinum | 7 d / R.T., H | 40 | 800 | 200 | |
| 1.06 |
| Low Flow |
|
CV-2510
| Tin Condensation | 7 d / R.T., H | 45 | 600 | 200 | |
45k cP
| 1.19 |
| Low/High Temperature, Flowable Elastomer |
|
R-2550
| Tin Condensation | 7 D / R.T. | 35 | 500 | 175 | 20 |
9k cP
| 1.08 |
| RTV, Low Viscosity Elastomer |
|
R-2560
| Tin | 7 d / R.T., h | 55 | 700 | 125 | |
31k
| 1.41 |
| For thermal insulating as a firewall sealant or as an ablative coating |
|
R7-2560
| | 7 d / R.T., | 50 | 375 | 110 | 35 |
150k cP
| |
| RTV High Temperature Adhesive/Sealant Silicone Elastomer
NGC Specification QFM-486 |
|
R8-2560
| | 7 d / R.T., H | 45 | 350 | 95 | 45 |
110k cP
| 1.23 |
| RTV High Temperature Adhesive/Sealant Silicone Elastomer
NGC Specification QFM-486 |
|
CV-2566
| Tin Condensation | 7 D / R.T | 55 | 950 | 150 | 40 |
56.8k cP
| 1.49 |
| Pourable, RTV Cure, Primed Lap Shear 575 psi (4.0 Mpa)
NGC Specification C104689 |
|
CV-2566
| Tin Condensation | 7 d / R.T., H | 55 | 950 | 150 | 40 |
55k cP
| 1.49 |
| Pourable, RTV Cure, Primed Lap Shear 575 psi (4.0 Mpa) |
|
CV1-2566
| Tin Condensation | 7 d / R.T., H | 50 | 900 | 160 | |
45k cP
| 1.45 |
| Lower Viscosity, Primed Lap Shear 650 psi (4.5 Mpa) |
|
CV2-2566
| Tin Condensation | 7 d / R.T., H | 55 | 900 | 140 | 40 |
| 1.50 |
| Thixotropic, RTV Cure, Primed Lap Shear 625 psi (4.3 Mpa) |
|
CV-2567
| Tin | 7 d / R.T., H | 21 | 80 | 150 | |
5k
| 1.01 |
| Diluent for Tin Condensation CV Silicones |
|
CV-2568
| Tin Condensation | 7 d / R.T., H | 50 | 175 | 60 | |
125k cP
| 0.64 |
| Long Worktime, Low Density, Primed Lap Shear 100 psi (0.69 Mpa) |
|
CV10-2568
| Platinum | 30 m / 150 | 40 | 235 | 170 | |
A:125k/B:80k cP
| 0.76 |
| Fast Cure, Low Density, Primed Lap Shear 175 psi (1.2 Mpa) |
|
SCV-2585
| Platinum | 15 m / 150 | 35 | 700 | 300 | |
A:56k/B:43k cP
| |
| Pourable Elastomer, Primed Lap Shear 475 psi (3.3) |
|
SCV-2586
| Platinum | 30 m / 150 | 45 | 225 | 150 | |
A:375k/B:275k
| 0.74 |
| Fast Cure, Low Density, Primed Lap Shear 175 psi (1.2 MPa) |
|
R-2588
| | 7 D / R.T., H. | 65 | 750 | 95 | |
825k
| 1.44 |
| Broad temperature range, lap shear 675 psi |
|
R10-2588
| | 7 d / R.T., H | 65 | 750 | 65 | |
750k cP
| |
| For potting, sealing, and bonding applications |
|
SCV-2590
| Platinum | 15 M / 150 | 45 | 950 | 125 | |
8k
| 1.02 |
| Pourable, primed lap shear 375 psi (2.6 MPa) |
|
SCV1-2590
| Platinum | 15 M / 150 | 50 | 925 | 90 | |
A:3.8k/B:2.8k cP
| 1.02 |
| Primed Lap Shear 175 psi (1.2 Mpa) |
|
SCV2-2590
| Platinum | 4 H / 65 | 45 | 475 | 85 | |
3.5k cP
| 1.04 |
| Low / High Temperature, Primed Lap Shear 250 psi (1.7 Mpa) |
|
SCV-2590-2
| Platinum | 15 M / 150 | 50 | 950 | 150 | |
9.5k cP
| 1.06 |
| Low Viscosity, Fast Cure |
|
SCV-2596
| Platinum | 30 M / 150 | 75 | 475 | 90 | |
| 1.19 |
| Electrically Conductive, 2.5 ohm·cm, Carbon Fiber Filled |
|
SCV1-2596
| Platinum | 30 M / 150 | 85 | 450 | | |
| 3.42 |
| Electrically Conductive, 0.005 ohm·cm, 1.2 W/m·K |
|
SCV1-2599
| Platinum | 7 D / R.T. | 75 | 200 | 30 | 50 |
| 1.53 |
| Thermally Conductive, 1.6 W/m·K |
|
SCV2-2599
| Platinum | 30 m / 150 | 55 | 400 | 225 | 55 |
140 g/min
| |
| 0.64 W/m·K |
|
CF19-2615
| Platinum | 30 M / 150 | 30 | 120 | 100 | |
A:1.3k/B:800 cP
| |
| Solventless |
|
R-2615
| Platinum | 15 M / 150 | 50 | 1300 | 100 | 20 |
A:6k/B:90 cP
| 1.03 |
| 1.41 Refractive Index, High Durometer |
|
R21-2615
| | 2 h / 50 | 75 | 1200 | 65 | |
A:30000 mPas/B:20000 mPas cP
| 1.07 |
| Use for potting and encapsulating electronic devices and for making
molded parts |
|
R-2615-3
| Platinum | 30 M / 150 | 50 | 1000 | 100 | |
A:6k/B:2.5k cP
| 1.06 |
| Low Viscosity, RTV Elastomer |
|
R-2619
| Platinum | 30 M / 150 | 50 | 725 | 350 | 80 |
A:85k/B:55k cP
| 1.03 |
| High Tear Elastomer, Moldable |
|
R-2620
| Platinum | 30 M / 150 | 60 | 1290 | 85 | |
9.6k cP
| 1.22 |
| High Durometer, Low Viscosity Elastomer |
|
R-2630
| Platinum | 30 M / 150 | 60 | 700 | 90 | 35 |
20k cP
| 1.09 |
| High Durometer, 7 ohm-cm |
|
R-2631
| Platinum | 60 M / 65 | 40 | 600 | 275 | 50 |
100
| 1.07 |
| Low Durometer, Tough, 50 ohm-cm |
|
R-2634
| Oxime | 7 D / R.T. | 80 | 250 | 90 | 50 |
90
| 3.41 |
| Low/High Temperature, 0.001 ohm-cm |
|
R-2634
| Oxime | 7 D / R.T. | 90 | 250 | 85 | 50 |
90
| 3.41 |
| Low/High Temperature, 0.001 ohm-cm
NGC Specification MS-403 |
|
R-2637
| Platinum | 30 M / 150 | 60 | 210 | 275 | |
| 3.60 |
| Fast cure, 0.006 ohm-cm |
|
CV-2640
| Platinum | 30 m / 150 | 75 | 475 | 90 | |
| 1.19 |
| 2.50 ohm-cm, Carbon Fiber filled, Primed Lap Shear 250 psi (1.7 Mpa) |
|
CV1-2640
| Platinum | 2 h / 65 | 40 | 525 | 225 | |
| 1.07 |
| 25 ohm-cm, Pumpable |
|
CV2-2640
| Platinum | 24 h / R.T., h | 30 | 500 | 350 | 30 |
A:1250k/B:100k cP
| 1.06 |
| Carbon Black filled |
|
CV3-2640
| Platinum | 7 d / R.T., H | 25 | 70 | 120 | |
A:10k/B:10k
| 1.01 |
| 1:1 Mix Ratio, 2.2 x 10(6) ohm-cm |
|
CV3-2640
| Platinum | 7 D / R.T. | 25 | 65 | 90 | |
11k
| 1.01 |
| 1:1 Mix Ratio, 5.2 x 10(6) ohm-cm
NGC Specification C108972 |
|
CV-2644
| Platinum | 30 m / 150 | 85 | 525 | | |
| 3.39 |
| 0.004 ohm·cm |
|
CV2-2644
| | 30 m / 150 | 85 | 500 | 100 | |
Paste
| 3.04 |
| 0.004 ohm·cm, remains conductive at high temp |
|
CV-2646
| Tin Condensation | 10 d / R.T., H | 80 | 400 | 90 | 60 |
| 3.86 |
| 0.007 ohm-cm, 1.0 W/(mK) |
|
CV1-2646
| Tin | 7 d / R.T., H | 90 | | | |
0 inches
| 2.20 |
| 0.005 ohm·cm |
|
CV2-2646
| Tin Condensation | 7 d / R.T., H | 75 | 300 | 70 | 55 |
Paste
| 3.23 |
| Remains Conductive at High Temperature, 1.5 W/mK |
|
R-2652
| Platinum | 60 M / 100 | 65 | 50 | 130 | |
4k cP
| 1.01 |
| Provides excellent shock and electrical insulation resistance |
|
R-2655
| Platinum | 60 M / 100 | 40 | 900 | 120 | |
5.4k cP
| 1.03 |
| 1.43 Refractive Index, Low/High Temp Elastomer |
|
CV-2680-12
| Platinum | 4 h / 65 | | | 850 | 115 |
| |
| Static dissipative thin film adhesive, Lap Shear 250 psi (1.7 Mpa) |
|
CV-2680-12
| Platinum | 4 h / 65 | | 1450 | 850 | 115 |
| |
| For electronic and space applications requiring low outgassing
and minimal volatile condensables to avoid condensation in
sensitive devices |
|
CV-2681-12
| Platinum | 4 h / 65 | | | | |
| |
| For electronic and space applications requiring low outgassing and
minimal volatile condensables to avoid condensation in sensitive devices |
|
CV-2681-12
| Platinum | 4 h / 65 | | | | |
| |
| For electronic and space applications requiring low outgassing and
minimal volatile condensables to avoid condensation in sensitive devices |
|
SP-270
| Non-Curing | | | | | |
1 cP
| 0.80 |
| Adhesion to Iridite Coated Materials |
|
SP-271
| Hydrolysis | | | | | |
| 0.80 |
| Addition-cured systems |
|
EPM-2890
| | 72 h / R.T. , H | 65 | 425 | 150 | |
| |
| Thermally conductive, non-corrosive RTV Silicone Adhesive |
|
CV-2900
| Oxime | 72 h / R.T. , H | 65 | 400 | 150 | |
| 2.33 |
| 0.6 W/m·K, Low Temperature |
|
R-2930
| Platinum | 30 M / 150 | 80 | 260 | 20 | |
| 1.55 |
| 1.46 W/mk (35x10(-4) cal/cm-sec-ºC) |
|
R-2939
| Platinum | 30 M / 150 | 70 | 300 | 70 | 45 |
70k
| 1.34 |
| Low Viscosity, 0.75 W/mk (18x10(-4) cal/cm-sec-ºC) |
|
R-2940
| Platinum | 30 M / 150 | 90 | 700 | 35 | 65 |
| 2.41 |
| High Durometer, Tough, 0.84 W/mk (20x10(-4) cal/cm-sec-ºC) |
|
CV-2942
| Platinum | 1 d / R.T., H then 15 m / 150 | 85 | 650 | 15 | 55 |
| 2.40 |
| 0.99 W/mk (24x10(-4) cal/cm-sec-ºC), Primed Lap Shear 375 psi (2.6 Mpa) |
|
CV-2943
| Tin Condensation | 7 d / R.T., H | 90 | 750 | 35 | 90 |
| 2.55 |
| 1.22 W/mk (29x10(-4) cal/cm-sec-ºC), Primed Lap Shear 475 psi (3.3 Mpa) |
|
CV-2946
| Platinum | 7 D / R.T. | 75 | 200 | 30 | 50 |
| 1.53 |
| 1.46 W/mk (0.0035 cal/cm-sec-ºC), Primed Lap Shear 165 psi (1.1 Mpa) |
|
CV-2946
| Platinum | 7 D / R.T. | 75 | 200 | 30 | 50 |
| 1.53 |
| 1.46 W/mk (0.0035 cal/cm-sec-ºC), Primed Lap Shear 165 psi (1.1 Mpa)
NGC Specification C816292 |
|
CV2-2946
| Platinum | 30 m / 150 | 55 | 400 | 225 | 55 |
| |
| 0.644 W/mk (15x10(-4) cal/cm-sec-°C), Thin Bond Line |
|
CV-2948
| Tin Condensation | 7 d / R.T., H | 80 | 250 | 30 | 45 |
| 1.57 |
| 1.95 W/mk (47x10(-4) cal/cm-sec-ºC), Primed Lap Shear 150 psi (1.0 Mpa) |
|
R-2949
| Platinum | 30 M / 150 | 75 | 275 | 50 | 45 |
75k cP
| |
| Low/High Temperature, 0.75 W/mk (18x10(-4) cal/cm-sec-ºC) |
|
MED-2955
| Platinum | 30 m / 150 | 60 | 425 | 200 | 60 |
| |
| Thermally conductive elastomer/0.63 W/(mK) |
|
MED20-2955
| Platinum | 30 m / 150 | 60 | 425 | 200 | 60 |
| |
| Thermally conductive elastomer/0.63 W/(mK) |
|
CV-2960
| Platinum | 7 d / R.T., H | 60 | 200 | 110 | 45 |
130k cP
| 1.34 |
| 0.828 W/mk (20x10(-4) cal/cm-sec-ºC), Flowable, Primed Lap Shear 205 psi (1.4 Mpa) |
|
CV1-2960
| Platinum | 4 h / 65 | 75 | 250 | 60 | 55 |
900k cP
| 1.45 |
| 1.11 W/mk (26x10(-4) cal/cm-sec-ºC) |
|
CV1-2960
| Platinum | 4 H / 65 | 75 | 250 | 60 | 55 |
900k cP
| 1.45 |
| 1.11 W/mk (26x10(-4) cal/cm-sec-ºC)
NG Specification C843583 |
|
CV-2961
| Platinum | 30 m / 150 | 75 | 275 | 40 | 45 |
300k cP
| 1.38 |
| 0.79 W/mk (19x10(-4) cal/cm-sec-ºC), Flowable, Low/High Temp, Primed Lap Shear 205 psi (1.4 Mpa) |
|
CV-2963
| Platinum | 4 h / 65 | 60 | 425 | 250 | 50 |
| 1.27 |
| 0.640 W/mk (15x10(-4) cal/cm-sec-ºC), Primed Lap Shear 275 psi (1.9 Mpa) |
|
CV1-2964
| | 15 m / 150 | 65 | 180 | 50 | |
| 2.34 |
| For applications requiring low outgassing and
minimal volatile condensables under extreme
operating conditions. |
|
MED-2980
| Platinum | 30 M / 150 | 80 | 300 | 20 | |
| 1.53 |
| Thermally conductive adhesive / 1.56 W/(mK) |
|
MED15-2980
| Platinum | 30 M / 150 | 80 | 300 | 20 | |
| 1.53 |
| Thermally conductive adhesive / 1.56 W/(mK) |
|
DDU-310 @ 1,000 Cp
| | | | | | |
| 0.97 |
| Clear polydimethylsiloxane liquid |
|
LS-3140
| | 30 m / 150 C | | | | |
A:16k/B:8.5k cP
| |
| Low Outgassing; Heat & UV Resistant; Medium Firm Gel |
|
LS1-3200
| Hydrolysis | 30 MIN / R.T. | | | | |
1 cP
| 0.77 |
| Optical primer for platinum systems |
|
LS2-3200
| Hydrolysis | 30 Min,R.T., 50% H | | | | |
1 cP
| 0.80 |
| Optical primer for platinum systems |
|
LS3-3200
| Hydrolysis | | | | | |
1 cP
| 0.77 |
| Optical primer for platinum systems |
|
LS4-3200
| | | | | | |
| 0.80 |
| Specially formulated optical primer designed for use with optical platinum
catalyzed, addition-cured systems where conventional silicone primers are
insufficient |
|
LS-3238
| Platinum | 30 M / 150 | 15 | | | |
1.5k cP
| 1.28 |
| Extended work time |
|
LS-3246
| Platinum | 1 H / 65 | 10 | | | |
1000 cP
| 1.04 |
| Surface Tack 5.3 psi |
|
LS-3249
| | 2 h | NA / 60 | | | |
| |
| For protection of sensitive photonics assemblies from mechanical shock,
thermal shock, dust, and ambient atmosphere. |
|
LS-3252
| 30 M / 150 | 1 D / R.T. | 10 | | | |
425 cP
| 1.07 |
| Extended work time |
|
LS-3351
| Platinum | 1 H / 100 | 55 | | | |
A:7.5k/B:4.6k cP
| |
| Excellent for Dispersing Phosphor |
|
LS-3354
| Platinum | 1 H / 70 | 65 | | | |
5.4k cP
| |
| Excellent for Dispersing Phosphor |
|
LS2-3354
| | 60 m / 70 | 15 | | | |
6k
| |
| Low moisture permeability, excellent for dispersing phosphors |
|
LS3-3354
| Platinum | 1 H / 70 | 60 | | | |
5.2k cP
| 0.97 |
| Excellent for Dispersing Phosphor |
|
LS4-3354
| | 60 m / 70 | 60 | | | |
4.2k cP
| |
| For potting, encapsulating, backfilling, and dampening applications requiring a
soft gel with optical clarity |
|
LS-3357
| Platinum | 1 H / 150 | 10 | | | |
200 cP
| 1.10 |
| Needs Heat to Cure |
|
MED-340
| Non-Curing | | | | | |
1.4k cP
| |
| 100% Simethicone USP/EP |
|
MED-341
| Non-Curing | | | | | |
2.1k cP
| |
| 30% Simethicone Emulsion USP |
|
MED-342
| Non-Curing | | | | | |
| |
| Simethicone GS, granular solid 30% Simethicone |
|
LS-3440
| Platinum | 1 H / 100 | | | | |
535 cP
| 0.97 |
| Very Soft, Bulk Gel Hardness 10.0 mm |
|
LS-3441
| Platinum | 30 M / 150 | | | | |
14.5k cP
| |
| Very Soft, Penetration 0.4 mm |
|
LS-3443
| Platinum | 30 M / 100 | | | | |
A:650/B:475 cP
| 1.00 |
| Very Firm, Penetration 5 mm |
|
GEL-3500
| Platinum | 45 m / 150 | See comments | | | |
A:12k/B:10.5k
| |
| Fuel Resistant Gel, Durometer -Type '00' 50 |
|
FS-3502-1
| Platinum Cure | 4 H / 50 | 10 | | | |
1.2k cP
| |
| Bonds aggressively to most surfaces |
|
CF1-3510
| Platinum | 30 M / 150 | 25 | 175 | 150 | |
A:70k/B:thin paste cP
| 1.50 |
| Fuel/Solvent Resistant |
|
FS-3511
| Platinum Cure | 30 M / 150 | 42 | 850 (5.9) | 240 | |
| 1.39 |
| Excellent for molding at rapid rates |
|
CF2-3521
| Platinum | 30 M / 150 | 35 | 750 | 325 | |
| 1.30 |
| Fast Cure |
|
CF3-3521
| Platinum | 30 M / 150 | 30-40 | 725 | 375 | |
| 1.26 |
| LSR for liquid injection molding |
|
R7-3521-11
| Platinum | 48 H / R.T. | 30 | 500 | 260 | 35 |
| 1.27 |
| Solvent Resistance
NGC Specification MS-181 |
|
R7-3521-11
| Platinum | 48 h / R.T. | 30 | 500 | 260 | 35 |
| 1.27 |
| Solvent Resistance |
|
CF2-3521-2
| Platinum | 2 D / R.T. | 35 | 600 | 265 | |
| 1.28 |
| Fast Cure, Black
NGC Specification MS-529 |
|
CF2-3521-2
| Platinum | 2 D / R.T. | 35 | 600 | 265 | |
| 1.28 |
| Fast Cure, Black |
|
CF5-3521-2
| Platinum | 2 D / R.T. | 30 | 550 | 275 | 35 |
240k cP
| 1.30 |
| LSR for liquid injection molding |
|
MED-360
| Non-Curing | | | | | |
100 - 100,000 cP
| 0.97 |
| Dimethyl Polymer |
|
FS-3600
| | | | | | |
1000 to 2000
| 1.28 |
| Fuel Resistant Fluid |
|
FS-3602
| | | | | | |
350, 1,000 and 12,500
| |
| Fluid, Volume Resistivity 1x1015 ohms·cm |
|
FS-3606
| | | | | | |
350, 1,000 and 12,500
| |
| Fluid, Volume Resistivity 1x1015 ohms·cm |
|
MED-361
| | | | | | |
Various
| 0.97 |
| DIMETHYL POLYMER |
|
FS-3701
| Acetoxy | 24 h / R.T., H. | 60 | 275 | 180 | |
| 4.10 |
| MagRAM Repair Butter for R-3901
NGC Specification ACS-MRS-6903 |
|
FS-3702
| Acetoxy | 24 h / R.T., H. | 30 | 325 | 400 | |
| 2.62 |
| MagRAM Repair Butter for R-3902
NGC Specification ACS-MRS-6903 |
|
FS-3703
| Acetoxy | 24 h / R.T., H. | 30 | 250 | 130 | |
| 0.96 |
| Dielectric Repair Butter for R-3903
NGC Specification ACS-MRS-6903 |
|
FS-3704
| Acetoxy | 24 h / R.T., H. | 60 | 200 | 15 | |
| 4.02-4.26 |
| MagRAM Repair Butter for R-3904
NGC Specifications ACS-MRS-6903 and ACS-MRS-6905 |
|
FS2-3704
| Oxime | 24 H / R.T., H | 45 | 130 | 50 | |
| 4.07 |
| Quick cure field repair for dings, gaps
and spaces <0.040” when using R-3904. For applications requiring solvent resistance,bonds aggressively to most surfaces. |
|
FS-3705
| Acetoxy | 24h / R.T., H. | 60 | 200 | 100 | |
| |
| MagRAM Repair Butter for R-3905
NGC Specifications ACS-MRS-6904 |
|
CF1-3710-2
| Platinum | 4 H / R.T. | | | | |
| .26 |
| Fuel/Solvent Resistant, 50 lbs/ft3
NGC Specification MS-468 |
|
CF1-3710-2
| Platinum | 4 H / R.T. | | | | |
| 0.26 |
| Fuel/Solvent Resistant, 50 lbs/ft3 (6.44 Kg/m3) |
|
FS-3711-11
| Platinum | | | | | |
| |
| Flourosilicone foam |
|
FS-3711-11
| Platinum | 2.5 H, R.T., H. | | | | |
| |
| Fluorosilicone foam |
|
FS-3730
| Acetoxy | 72 H / R.T., H | 35 | 900 | 440 | 55 |
Thixotropic
| 1.40 |
| Available in Gray / Black / Translucent |
|
FS1-3730
| Acetoxy | 7 D / R.T., H | 35 | 850 (5.9) | 425 | 60 (10.6) |
150 gpm
| 1.4 |
| Bonds Aggressively |
|
FS3-3730
| Acetoxy | 72 H / R.T. | 35 | 820 | 400 | 50 |
| |
| Translucent, Fast Cure, Bonds aggressively to most surfaces |
|
FS3-3730
| Acetoxy | 72 H / R.T. | 35 | 800 | 400 | 50 |
| 1.35 |
| Translucent, Fast Cure
NGC Specification ACS-MRS-2115 |
|
FS3-3730-1
| | | 35 | 820 | 400 | |
| 1.35 |
| For sealing and bonding applications requiring solvent and/or fuel resistance |
|
FS-3730-11
| Acetoxy | 72 h / R.T., H | 40 | 700 | 275 | 50 |
Thixotropic
| 1.48 |
| Lap Shear after 7 days *1) 275 psi (1.9 MPa) |
|
FS-3730-2
| Acetoxy | 7 D / R.T. | 35 | 700 | 325 | 50 |
| 1.40 |
| Black, One-Part, RTV Silicone |
|
FS-3756
| Oxime | 8 h / R.T., H. | 35 | 40 | 25 | 15 |
| 2.06 |
| Electrically Conductive RTV Fluorosilicone Gap Filler
NGC Specification ACS-MRS-7008 |
|
FS-3757
| Acetoxy | > 18 h / R.T., H. | 40 | 75 | 100 | 25 |
| 2.15 |
| Electrically Conductive RTV Fluorosilicone Gap Filler
NGC Specification ACS-MRS-7008 |
|
FS-3758
| Acetoxy | 24 h / R.T./ H | | | | |
| 3.56 |
| Electrically Conductive RTV Glazing Compound
NGC Specification ACS-MRS-3204 |
|
FS-3775
| Acetoxy | 72 h / R.T., H | 30 | 450 | 400 | 40 |
250 gpm
| 1.29 |
| High Temperature, Fuel Resistant |
|
FS-3780
| Multiple | 5 M / 116 | 50 | 1200 | 325 | 150 |
| 1.44 |
| Multiple catalysts, see product profile |
|
FS-3781
| | 30 min. / 120 and 1 hour / 150 | 30 | 850 | 300 | 40 |
| 1.33 |
| Fluororsilicone High Consistency Elastomer |
|
FS1-3781
| Peroxide | 30 min. / 120 and 1 hour / 150 | 70 | 280 | 60 | 45 |
172 mils
| 4.10 |
| 75 mol% fluorosilicone; 45% carbonyl iron powder (CIP); High Consistency Rubber |
|
CF1-3800
| Platinum | 30 M / 150 | 50 | 125 | 50 | |
Paste
| 1.53 |
| Thermally Conductive, 1.25 W/mK |
|
R-3901
| Acetoxy | 72 h / R.T., H | | 415 | 60% | 70 |
| 4.20 |
| Fluorosilicone MagRam Sprayable Dispersion
NGC Specification ACS-MRS-6903 |
|
R-3902
| Acetoxy | 72 h / R.T., H | | 550 | 230 | 60 |
| 2.67 |
| Fluorosilicone MagRam Sprayable Dispersion
NGC Specification ACS-MRS-6903 |
|
R-3903
| Acetoxy | 72 h / R.T., H | | 320 | 150 | 60 |
| .92 |
| Fluorosilicone MagRam Sprayable Dispersion
NGC Specification ACS-MRS-6903 |
|
R-3904
| Acetoxy | 72 h / R.T. H | | 360 | 75 | 50 |
| 4.18 |
| Fluorosilicone MagRam Sprayable Dispersion
NGC Specification ACS-MRS-6903 |
|
R-3905
| Acetoxy | 72 h / R.T., H | 85 | 400 | 75 | |
| 3.95 |
| Fluorosilicone MagRam Sprayable Dispersion
NGC Specification ACS-MRS-6904 |
|
R-3930
| Acetoxy | 72 h / R.T., H | 35 | 850 | 400 | 50 |
| 1.36 |
| Dispersion Coating, 60% Solids |
|
R1-3930-11
| Acetoxy | 72 H / R.T., H | 40 | 725 | 250 | 40 |
Thixotropic
| 1.48 |
| Sprayable Top Coat Fed. Color Standard 36118 -- |
|
R1-3930-11
| Acetoxy | 72 H / R.T., H | 40 | 725 | 250 | 40 |
Thixotropic
| 1.48 |
| *3) 240 psi (1.7Mpa) Lap Shear at 7 D @ R.T., H / Fed. Color Standard 36118 |
|
R2-3930-11
| Acetoxy | 72 h / R.T., H | 40 | 900 | 400 | 60 |
Thixotropic
| 1.36 |
| *3) 315 psi (2.2Mpa) Lap Shear at 7 D @ R.T., H / Fed. Color Standard 36622 |
|
R2-3930-11
| Acetoxy | 72 h / R.T., H | 40 | 900 | 400 | 60 |
Thixotropic
| 1.36 |
| Sprayable Top Coat Fed. Color Standard 36622-- |
|
R3-3930-11
| Acetoxy | 72 h / R.T., H | 40 | 800 | 400 | 50 |
Thixotropic
| 1.36 |
| Sprayable Top Coat Fed. Color Standard 36375-- |
|
R3-3930-11
| Acetoxy | 72 h / R.T., H | 40 | 800 | 400 | 50 |
Thixotropic
| 1.36 |
| *3) 375 psi (2.6Mpa) Lap Shear at 7 D @ R.T., H / Fed. Color Standard 36375 |
|
R4-3930-11
| | 72 h / R.T., H | 45 | 750 | 480 | 71 |
| 1.47 |
| For coating, sealing and bonding applications requiring solvent and/or fuel
resistance |
|
R-3975
| Acetoxy | 72 h / R.T., H | 25 | 425 | 400 | 35 |
| 1.29 |
| RTV Fluorosilicone Dispersion |
|
R-3975
| | 72 h @ 25 C | 35 | 850 | 400 | 50 |
| 1.36 |
| RTV Cure Fluorosilicone Dispersion |
|
MED-400
| | | | | | |
350 - 100,000
| |
| Lubricious and/or hydrophobic coating, flourosilicone polymer |
|
MED-4011
| Platinum | 3 M / 150 | 25 | 675 | 530 | |
A:114k/B:1.6k cP
| 1.09 |
| Flowable |
|
MED1-4013
| Platinum | 1 D / R.T. | 20 | 1000 | 800 | 130 |
80k cP
| 1.12 |
| RTV, Fast Cure |
|
MED2-4013
| Platinum | 15 M / 150 | 15 | 1000 | 800 | 130 |
80k cP
| 1.12 |
| Fast Cure |
|
MED3-4013
| Platinum | 1 D / R.T. | 20 | 1000 | 800 | 130 |
80k cP
| 1.12 |
| RTV, Longer Work Time |
|
MED-4014
| Platinum | 10 M / 116 | 14 | 675 | 1450 | 140 |
60 cP
| 1.09 |
| Low Durometer |
|
MED-4019
| Platinum | 10 M / 171 | 55 | 1300 | 600 | 200 |
A:150/B:130
| 1.23 |
| High Tear, Split Resistant |
|
MED-4020
| Platinum | 10 M / 116 | 25 | 1400 | 1200 | 180 |
65
| 1.10 |
| High Tear |
|
MED-4025
| Platinum | 10 M / 171 | 30 | 1500 | 900 | 140 |
A:90/B:85
| 1.11 |
| Low Tension Set |
|
MED-4032
| | 10 m / 116 | 30 | 1200 | 1100 | |
| 1.10 |
| A series of versatile high consistency elastomers designed for optimal
performance in a wide range of applications |
|
MED-4035
| Platinum | 10 M / 116 | 35 | 1500 | 1125 | 185 |
70
| 1.10 |
| High Tear |
|
MED-4042
| | 10 m / 116 | 40 | 1475 | 950 | |
| |
| A series of versatile high consistency elastomers designed for optimal
performance in a wide range of applications |
|
MED-4044
| Platinum | 5 M / 177 | 40 | 850 | 320 | 150 |
A:120k/B:270 cP
| 1.09 |
| Flowable, Medium Durometer, High Tear |
|
MED-4050
| Platinum | 10 M / 116 | 50 | 1450 | 1000 | 250 |
A:100/B:90
| 1.16 |
| High Tear |
|
MED-4052
| | 10 m / 116 | 50 | 1325 | 1100 | |
| 1.16 |
| A series of versatile high consistency elastomers designed for optimal
performance in a wide range of applications |
|
MED-4055
| Platinum | 10 M / 138 | 55 | 1575 | 900 | 300 |
A:80/B:70
| 1.15 |
| Ultra High Tear |
|
MED-4062
| | 10 m / 116 | 60 | 1300 | 875 | |
| 1.16 |
| A series of versatile high consistency elastomers designed for optimal
performance in a wide range of applications |
|
MED-4065
| Platinum | 10 M / 116 | 65 | 1100 | 950 | 250 |
A:135/B:120
| 1.21 |
| High Tear |
|
MED-4070
| Platinum | 10 M / 138 | 70 | 1325 | 700 | 285 |
A:120/B:100
| 1.19 |
| Abrasion / Fatigue Resistant |
|
MED-4072
| | 10 m / 116 | 70 | 1100 | 875 | |
| 1.22 |
| A series of versatile high consistency elastomers designed for optimal
performance in a wide range of applications |
|
MED-4080
| Platinum | 10 M / 116 | 80 | 1100 | 700 | 215 |
A:145/B:100
| 1.21 |
| High Tear |
|
MED-4082
| | 10 m / 116 | 80 | 1050 | 800 | |
| 1.22 |
| A series of versatile high consistency elastomers designed for optimal
performance in a wide range of applications |
|
MED-4086
| | 45 m / 150 | 55 type 000 | 40 | 475 | |
A:8.3k/B:4.6k
| |
| Ultra-soft elastomer |
|
CAT-41
| Non-curing | | | | | |
| |
| Inhibitor |
|
MED2-4102
| Non-Curing | | | | | |
200
| 2.31 |
| HCR Masterbatch 75% BaSO4 |
|
MED3-4102
| Non-Curing | | | | | |
| 2.27 |
| HCR Masterbatch 75% Titanium Dioxide |
|
MED-4102-X
| Non-Curing | | | | | |
| |
| HCR color masterbatches available in: white, black, red, orange, yellow, green, dark blue and blue |
|
MED4-4115
| Peroxide | 5 M / 116 | 50 | 1500 | 450 | 100 |
90
| 1.15 |
| PD50-S Precatalyzed |
|
MED4-4116
| Peroxide | 5 M / 116 | 70 | 1350 | 375 | 125 |
130
| 1.21 |
| PD50-S Precatalyzed |
|
MED-4120
| Peroxide | 5 M / 116 | 25 | 1300 | 900 | 115 |
65
| 1.10 |
| Peroxide |
|
MED-4128
| Peroxide | 10 M / 116 | 25 | 1075 | 825 | 75 |
71
| 1.11 |
| Low Tension Set, Uncatalyzed |
|
MED-4135
| Peroxide | 5 M / 116 | 35 | 1250 | 800 | 110 |
70
| 1.10 |
| Peroxide |
|
MED-4150
| Peroxide | 5 M / 116 | 50 | 1450 | 700 | 180 |
100
| 1.16 |
| Peroxide |
|
MED-4159
| Amine | 7 D / R.T. | | | | |
170 cP
| 0.87 |
| Low Density, High Lubricity |
|
MED1-4161
| | 5D / R.T. | 25 | | | |
140
| .87 |
| AMINO FUNCTIONAL SILICONE COATING |
|
MED10-4161
| Amine | 5 d / R.T., H. | 25 (00) | | | |
| 0.87 |
| Amino functional silicone coating |
|
MED-4162
| Non-Curing | | | | | |
28.5k cP
| |
| Lubricious, Low Cold Flow |
|
MED-4165
| Peroxide | 5 M / 116 | 65 | 1200 | 500 | 200 |
| 1.21 |
| Peroxide |
|
MED-4174
| Peroxide | 5 M / 116 | 50 | 1200 | 775 | 225 |
105
| 1.15 |
| Peroxide |
|
MED-420
| | | | | | |
100 - 100,000
| |
| Methyl Fluoro Copolymer (low fluoro) |
|
MED-4211
| Platinum | 3 M / 150 | 25 | 675 | 530 | |
A:110k/B:1.6k cP
| 1.09 |
| Flowable |
|
MED1-4213
| Platinum | 1 D / R.T. | 20 | 1000 | 800 | 130 |
80k cP
| 1.12 |
| RTV, Fast Cure |
|
MED2-4213
| Platinum | 15 M / 150 | 15 | 1000 | 800 | 130 |
80k cP
| 1.12 |
| Fast Cure |
|
MED3-4213
| Platinum | 1 D / R.T. | 20 | 1000 | 800 | 130 |
80k cP
| 1.12 |
| RTV, Longer Work Time |
|
MED2-4220
| Platinum | 15 M / 150 | 20 | 550 | 500 | |
A:21k/B:16.5k cP
| 1.07 |
| Rapid RTV Cure |
|
MED4-4220
| Platinum | 15 M / 150 | 17 | 650 | 575 | 35 |
A:23k/B:18k cP
| |
| Low Viscosity |
|
MED-4244
| Platinum | 5 M / 177 | 40 | 850 | 300 | 150 |
A:120k/B:270 cP
| 1.10 |
| Flowable, Medium Durometer |
|
MED-4286
| | 45 m / 150 | 55 - type 000 | 45 | 475 | |
A:8.3k/B:4.6k cP
| |
| Low-durometer, ideal for applications requiring a soft, flexible, moldable elastomer |
|
DDU-4330
| | 3 m @ 150 | 25 | 700 | 525 | |
A:115k/B:1.6k
| 1.09 |
| Adhesive, moldable elastomer |
|
DDU-4340
| Tin Condensation | 30m @ 23°C | 50 | 550 | 175 | |
54k
| 1.14 |
| Pourable, three-component silicone |
|
DDU-4351
| | 30 m / 23 | 75 | 70 | 120 | |
10k
| 0.98 |
| Moldable, RTV Gel |
|
DDR-4355
| | 3 h / 60 | | | | |
15k
| |
| Superior tack for transdermal coating applications |
|
MED2-4420
| Platinum | 15M / 150 | 20 | 585 | 500 | 20 |
A:20k/B:15k
| 1.07 |
| LOW VISCOSITY, RAPID RTV CURE |
|
MED4-4420
| Platinum | 15M / 150 | 17 | | 570 | 35 |
A:23k/B:18k
| |
| LOW VISCOSITY |
|
MED2-4502
| Non-Curing | | | | | |
| 2.31 |
| HCR Masterbatch 75% BaSO4 |
|
MED3-4502
| Non-Curing | | | | | |
| 2.27 |
| HCR Masterbatch 75% Titanium Dioxide |
|
MED-4502-X
| Non-Curing | | | | | |
| |
| HCR color masterbatches available in: white, black, red, orange, yellow, green, dark blue and blue |
|
MED4-4515
| Peroxide | 5 M / 116 | 50 | 1500 | 450 | 100 |
90
| 1.15 |
| PD50-S Precatalyzed |
|
MED4-4516
| Peroxide | 5 M / 116 | 70 | 1350 | 375 | 125 |
130
| 1.21 |
| PD50-S Precatalyzed |
|
MED-4520
| Peroxide | 5 M / 116 | 25 | 1300 | 900 | 115 |
65
| 1.10 |
| Peroxide |
|
MED-4535
| Peroxide | 5 M / 116 | 35 | 1250 | 800 | 110 |
70
| 1.10 |
| Peroxide |
|
MED-4550
| Peroxide | 5 M / 116 | 50 | 1450 | 700 | 180 |
100
| 1.16 |
| Peroxide |
|
MED-4565
| Peroxide | 5 M / 116 | 65 | 1200 | 500 | 200 |
| 1.21 |
| Peroxide |
|
MED-460
| | | | | | |
350 - 100,000 cP
| |
| Methyl Fluoro Copolymer (High Fluoro) |
|
DDU-4630
| Platinum | 10m / 116 | 35 | 1525 | 1025 | 200 |
| 1.11 |
| Soft, two-part, high tear strength silicone elastomer |
|
MED-4714
| Platinum | 10 M / 116 | 14 | 675 | 1450 | 140 |
60
| 1.09 |
| Low Durometer |
|
MED-4720
| Platinum | 10 M / 116 | 25 | 1400 | 1200 | 180 |
A:65/B:65
| 1.10 |
| High Tear |
|
CF-4721
| Peroxide | 15 M / 150 | 75 | | | |
125 cP
| 1.10 |
| Hard Potting Compound, 1.52 Refractive Index, Uncatalyzed |
|
CF2-4721
| Peroxide | 15 M / 150 | 75 | | | |
130 cP
| 1.09 |
| Hard Potting Compound, 1.52 Refractive Index, Precatalyzed |
|
MED-4725
| Platinum | 10 M / 171 | 30 | 1500 | 900 | 140 |
A:90/B:85
| 1.11 |
| Low Tension Set |
|
MED-4735
| Platinum | 10 M / 116 | 35 | 1500 | 1125 | 185 |
70
| 1.10 |
| High Tear |
|
MED-4750
| Platinum | 10 M / 116 | 50 | 1450 | 1000 | 250 |
A:100/B:90
| 1.16 |
| High Tear |
|
MED-4755
| Platinum | 10 M / 138 | 55 | 1600 | 900 | 300 |
A:80/B:70
| 1.15 |
| Ultra High Tear |
|
MED-4765
| Platinum | 10 M / 116 | 65 | 1100 | 950 | 250 |
A:135/B:120
| 1.21 |
| High Tear |
|
MED-4770
| Platinum | 10 M / 138 | 70 | 1300 | 700 | 285 |
A:110/B:100
| 1.19 |
| Abrasion / Fatigue Resistant |
|
MED-4780
| Platinum | 10 M / 116 | 80 | 1100 | 700 | 215 |
A:145/B:100
| 1.21 |
| High Tear |
|
MED2-4800
| Non-Curing | | | | | |
| 1.57 |
| LSR Masterbatch 50% BaSO4 |
|
MED3-4800
| Non-Curing | | | | | |
| 1.54 |
| LSR Masterbatch 50% Titanium Dioxide |
|
MED4-4800
| Non-curing | | | | | |
| |
| Materbatch, designed for heat curable silicones |
|
MED-4800-X
| Non-Curing | | | | | |
| |
| LSR color masterbatches available in solid or translucent: white, black, red, orange, yellow, green, dark blue, and blue |
|
MED50-4800-X
| | | | | | |
| |
| Translucent LSR MASTERBATCH, VARIOUS COLORS |
|
MED-4801
| Platinum | 5 M / 150 | 40 (00) | 325 | 1075 | 60 |
160
| |
| Low Durometer, 40 "00" Scale, High Tear |
|
MED-4805
| Platinum | 5 M / 150 | 7 | 525 | 1100 | 60 |
A:65/B:70
| 1.07 |
| Injection Molding Elastomer |
|
MED-4810
| Platinum | 5 M / 150 | 11 | 750 | 1100 | 70 |
A:80/B:100
| 1.07 |
| Injection Molding Elastomer |
|
MED-4815
| Platinum | 5 M / 150 | 15 | 925 | 975 | 125 |
A:65/B:85
| 1.10 |
| Injection Molding Elastomer |
|
MED-4820
| Platinum | 5 M / 150 | 20 | 1000 | 900 | 125 |
A:35/B:40
| 1.13 |
| Injection Molding Elastomer |
|
MED-4830
| Platinum | 5 M / 150 | 30 | 1350 | 750 | 150 |
A:65/B:80
| 1.13 |
| Injection Molding Elastomer |
|
MED-4840
| Platinum | 5 M / 150 | 40 | 1100 | 550 | 250 |
A:160/B:290
| 1.12 |
| Injection Molding Elastomer |
|
MED-4842
| Platinum | 10 m / 150 | 40 | 1000 | 425 | 250 |
| 1.17 |
| Injection molding elastomer |
|
MED-4850
| Platinum | 5 M / 150 | 50 | 1400 | 660 | 230 |
A:50/B:75
| 1.15 |
| Injection Molding Elastomer |
|
MED1-4855
| | 5 m / 165 | 55 | 1100 | 475 | 225 |
A:135 g/minute/B:270 g/minute
| 1.15 |
| Injection Molding Elastomer |
|
MED-4860
| Platinum | 5 M / 165 | 60 | 1300 | 525 | 260 |
A:50/B:80
| 1.16 |
| Injection Molding Elastomer |
|
MED-4870
| Platinum | 5 M / 165 | 70 | 1250 | 300 | 185 |
A:30/B:60
| 1.16 |
| Injection Molding Elastomer |
|
MED-4880
| Platinum | 5 M / 165 | 80 | 950 | 250 | 80 |
A:25/B:125
| 1.16 |
| Injection Molding Elastomer |
|
MED2-4900
| Non-Curing | | | | | |
| 1.57 |
| LSR Masterbatch 50% BaSO4 |
|
MED4-4900
| Non-curing | | | | | |
| |
| LSR foam masterbatch |
|
MED-4900-X
| Non-Curing | | | | | |
| |
| LSR color masterbatches available in solid or translucent: white, black, red, orange, yellow, green, dark blue, and blue |
|
MED50-4900-X
| | | | | | |
| |
| Translucent LSR MASTERBATCH, VARIOUS COLORS |
|
MED-4901
| Platinum | 5 M / 150 | 40 (00) | 325 | 1075 | 60 |
160
| |
| Low Durometer, 40 "00" Scale, High Tear |
|
MED-4905
| Platinum | 5 M / 150 | 7 | 525 | 1100 | 60 |
A:65/B:70
| 1.07 |
| Injection Molding Elastomer |
|
MED-4910
| Platinum | 5 M / 150 | 10 | 750 | 1100 | 70 |
A:80/B:100
| 1.07 |
| Injection Molding Elastomer |
|
MED-4915
| Platinum | 5 M / 150 | 15 | 925 | 975 | 125 |
A:65/B:85
| 1.10 |
| Injection Molding Elastomer |
|
MED-4917
| Platinum | 10M / 150 | 20 | 475 | 350 | |
A:14k/B:9.5k
| 1.06 |
| Low viscocity, long pot life |
|
MED-4920
| Platinum | 5 M / 150 | 20 | 1000 | 900 | 125 |
A:35/B:40
| 1.13 |
| Injection Molding Elastomer |
|
MED-4930
| Platinum | 5 M / 150 | 30 | 1350 | 750 | 150 |
A:65/B:80
| 1.13 |
| Injection Molding Elastomer |
|
MED-4940
| Platinum | 5 M / 150 | 40 | 1100 | 550 | 250 |
| 1.12 |
| Injection Molding Elastomer |
|
MED-4942
| Platinum | 10M / 150 | 40 | 1000 | 475 | 250 |
90 g/minute
| 1.18 |
| Resists Blocking |
|
MED-4950
| Platinum | 5 M / 150 | 50 | 1400 | 660 | 230 |
A:50/B:75
| 1.15 |
| Injection Molding Elastomer |
|
MED1-4955
| Platinum | 5M / 165 | 55 | 1100 | 475 | 225 |
A:135 g / minute/B:270 g / minute
| 1.15 |
| Self Lubricating |
|
MED-4960
| Platinum | 5 M / 165 | 60 | 1300 | 525 | 260 |
A:50/B:80
| 1.16 |
| Injection Molding Elastomer |
|
MED-4970
| Platinum | 5 M / 165 | 70 | 1250 | 300 | 185 |
A:30/B:60
| 1.16 |
| Injection Molding Elastomer |
|
MED-4980
| Platinum | 5 M / 165 | 80 | 950 | 250 | 80 |
A:25/B:125
| 1.16 |
| Injection Molding Elastomer |
|
CAT-50
| Non-Curing | | | | | |
| 0.98 |
| Platinum Catalyst |
|
LS-5238
| Non-curing | | | | | |
350 or 1000
| 1.25 / 1.27 |
| 1.38 refractive index, matches MgF2 |
|
LS-5246
| Non-Curing | | | | | |
1.6k cP
| 1.04 |
| Low volatility |
|
LS-5252
| Non-Curing | | | | | |
575 cSt
| 1.08 |
| Low volatility |
|
LS-5257
| Non-Curing | | | | | |
1.4k cP
| 1.14 |
| Low volatility |
|
CAT-53
| Non-Curing | | | | | |
| 0.98 |
| Diphenyl Platinum Catalyst |
|
MED50-5338
| Platinum | 30M / 150 | 30 | 650 | 350 | |
A:85 g/minute/B:110 g/minute
| 1.26 |
| FLUOROSILICONE |
|
MED50-5438
| Platinum | 30M / 150 | 30 | 650 | 350 | 30 |
A:85 g/minute/B:110 g/minute
| 1.26 |
| Fluorosilicone |
|
MED-5440
| | 30 m / 150 | 40 | 1150 | 335 | 60 |
| 1.39 |
| For applications requiring a medium hardness silicone with
solvent resistance |
|
LSR-5805
| Platinum | 5 M / 150 | 7 | 525 | 1100 | 60 |
75
| 1.07 |
| Low Durometer |
|
LSR-5810
| Platinum | 5 M / 150 | 11 | 750 | 1075 | 70 |
80
| 1.07 |
| Liquid Injection Molding Elastomer |
|
LSR-5815
| Platinum | 5 M / 150 | 15 | 900 | 1100 | 125 |
55
| 1.12 |
| Liquid Injection Molding Elastomer |
|
LSR-5820
| Platinum | 5 M / 150 | 20 | 1000 | 900 | 125 |
40
| 1.12 |
| Liquid Injection Molding Elastomer |
|
LSR-5830
| Platinum | 5 M / 150 | 30 | 1325 | 750 | 170 |
45
| 1.14 |
| Liquid Injection Molding Elastomer |
|
LSR-5840
| Platinum | 5 M / 150 | 40 | 1100 | 550 | 250 |
| 1.12 |
| Liquid Injection Molding Elastomer |
|
LSR-5850
| Platinum | 5 M / 150 | 50 | 1400 | 660 | 230 |
50
| 1.15 |
| Liquid Injection Molding Elastomer |
|
LSR-5860
| Platinum | 5 M / 165 | 60 | 1300 | 525 | 260 |
A:50/B:50
| 1.16 |
| Liquid Injection Molding Elastomer |
|
LSR-5870
| Platinum | 5 M / 150 | 70 | 1100 | 525 | 200 |
35
| 1.16 |
| Liquid Injection Molding Elastomer |
|
LSR-5880
| Platinum | 5 M / 165 | 80 | 950 | 250 | 90 |
A:25/B:125
| 1.16 |
| High Durometer |
|
MED-6010
| Platinum | 30 M / 150 | 45 | 900 | 140 | 30 |
A:19k/B:13k cP
| 1.05 |
| 1.43 R.I., Optically Clear |
|
MED-6015
| Platinum | 15 M / 150 | 50 | 1300 | 100 | |
A:6k/B:90 cP
| 1.03 |
| 1.41 R.I., Optically Clear, Low Viscosity |
|
MED-6019
| Platinum | 2 h / 50 | 75 | 1200 | 65 | |
A:30000 mPas/B:20000 mPas cP
| 1.07 |
| low viscosity, high durometer |
|
MED-6020
| Platinum | 30 M / 150 | 40 | 640 | 175 | 35 |
A:70k/B:40k cP
| |
| 1.43 R.I., Optically Clear |
|
MED-6033
| Platinum | 30 M / 150 | 50 | 750 | 305 | 80 |
A:75k/B:50k cP
| 1.03 |
| 1.41 R.I., Optically Clear, Pourable |
|
LS-6140
| Platinum | 15 M / 150 | | 850 | 90 | |
A:3.7k/B:2.6k cP
| 1.02 |
| Low Outgassed |
|
LS1-6140
| | 60 M / 150 | 50 | 900 | 90 | |
A:3.4k/B:2.5k cP
| 1.02 |
| Optically clear silicone system |
|
LS-6143
| Platinum | 4 H / 65 | 40 | 600 | 125 | |
3.6k cP
| 1.04 |
| Low Outgassing |
|
MED-6210
| Platinum | 30 M / 150 | 45 | 900 | 140 | 30 |
A:19k/B:13k cP
| 1.05 |
| 1.43 R.I., Optically Clear |
|
MED-6215
| Platinum | 15 M / 150 | 50 | 1300 | 100 | |
A:6k/B:90 cP
| 1.03 |
| 1.41 R.I., Optically Clear, Low Viscosity |
|
MED-6219
| Platinum | 2 h / 50 | 75 | 1200 | 65 | 35 |
A:30000 mPas/B:20000 mPas cP
| 1.07 |
| Low Viscosity, High Durometer |
|
MED-6233
| Platinum | 30 M / 150 | 50 | 750 | 305 | 80 |
A:75k/B:50k cP
| 1.03 |
| 1.41 R.I., Optically Clear, Pourable |
|
LS-6257
| Platinum | 1 H / 150 | 40 | 130 | 50 | |
150 cSt
| 1.15 |
| Surface Tack 6.8 psi, Needs Heat to Cure |
|
MED1-6300
| | 5 h / 140 | | | | |
1000
| .98 |
| High purity silicone gel, 5 mm penetration |
|
MED2-6300
| | 5 h / 140 | | | | |
1000
| .98 |
| High purity silicone gel, 10 mm penetration |
|
MED3-6300
| Platinum | 5 h / 140 | | | | |
1000 cP
| 0.98 |
| High Penetration, Soft Gel |
|
MED3-6320
| | 5 h / 140 | | | | |
1000
| 0.98 |
| silicone gel, 15 mm penetration |
|
MED-6321
| | 5 h / 140 | | | | |
1000
| .98 |
| silicone gel, 5 mm penetration |
|
MED-6322
| | 5 h / 140 | | | | |
1000
| .98 |
| silicone gel, 10 mm penetration |
|
MED-6340
| Platinum | 30 m / 140 | | | | |
A:10k/B:6k
| 0.97 |
| LOW PENETRATION, LOW TACK GEL |
|
MED-6342
| Platinum | 45 m / 135 | | | | |
A:9.5k/B:6.5k
| |
| Low penetration, high tack gel |
|
MED-6345
| Platinum | 3 H / 60 | | | | |
13k cP
| |
| High Penetration, High Tack Gel |
|
MED-6350
| Platinum | 30 m / 100 | | | | |
A:25k/B:18.5k
| |
| Medium penetration, medium tack gel |
|
MED-6370
| Platinum | 90 m / 80 | | | | |
600
| |
| Soft gel |
|
MED-6381
| | 30M / 23 | 75 | 70 | 125 | |
10k
| 0.98 |
| Firm RTV Gel |
|
MED-6382
| Tin Condensation | 1 D / R.T. | 45 | 500 | 100 | |
40k cP
| 1.13 |
| Fast Cure, Opaque |
|
MED-6385
| Tin Condensation | 1 D / R.T. | 45 | 500 | 175 | |
45k cP
| 1.13 |
| Fast Cure, Opaque |
|
MED-6400
| Platinum | 2* | 30 | 1500 | 775 | 150 |
600 cP
| |
| 1.43 R.I., in Xylene |
|
MED10-6400
| Platinum | See Comments | 30 | 1500 | 775 | 150 |
600 cP
| |
| 1.43 R.I., in Xylene
30 m/25C + 45 m/75C + 135 m/150C |
|
MED-6600
| Platinum | 2* | 25 | 1200 | 750 | 125 |
400 cP
| |
| 1.465 R.I., in Xylene |
|
MED10-6600
| Platinum | 2* | 25 | 1200 | 750 | 125 |
400 cP
| |
| 1.465 R.I., in Xylene |
|
MED1-6604
| Acetoxy | 1 D / R.T. | 15 | 75 | 375 | |
250 cP
| 0.99 |
| One Part, Smooth Finish |
|
MED11-6604
| Acetoxy | 1 D / R.T. | 15 | 75 | 375 | |
250 cP
| 0.99 |
| One Part, Smooth Finish |
|
MED-6605
| Acetoxy | 5 D / R.T. | 25 | 1425 | 950 | 125 |
700 cP
| 1.09 |
| One Part, in Xylene |
|
MED10-6605
| Acetoxy | 5 D / R.T. | 25 | 1425 | 950 | 125 |
700 cP
| 1.09 |
| One Part, in Xylene |
|
MED16-6606
| Acetoxy | 3 D / R.T. | 15 | 1250 | 900 | 115 |
95 cP
| 1.11 |
| One Part Adhesive, in Heptane |
|
MED6-6606
| Acetoxy | 3 D / R.T. | 15 | 1100 | 950 | 130 |
90 cP
| 1.11 |
| One Part Adhesive, in Heptane |
|
MED-6607
| Oxime | 7 D / R.T. | 40 | 1150 | 650 | 95 |
6.5k cP
| 1.11 |
| One Part, in Naphtha |
|
MED10-6607
| Oxime | 7 D / R.T. | 40 | 1250 | 650 | 95 |
6k cP
| 1.11 |
| One Part, in Naphtha |
|
MED-6608
| Oxime | 7 D / R.T. | 30 | 300 | 200 | |
1.2k cP
| |
| Various Colors, MSDS for black inks |
|
MED8-6608-2
| | 7 d / R.T., H | | | | |
800
| 1.83 |
| Silicone Coating/Marking Ink |
|
MED-6613-2
| Platinum | | | | | |
A:1.2k/B:2.9k cP
| |
| Black Fast-curing Ink |
|
MED1-6613-7
| Platinum | 5 m / R.T., H. | | | | |
A:2.7k/B:1k
| |
| Blue Fast-curing Ink |
|
MED-6640
| Platinum | 2* | 40 | 1700 | 1000 | 300 |
4k cP
| |
| Ultra High Tear, in Xylene |
|
MED10-6640
| Platinum | 2* | 40 | 1700 | 1000 | 300 |
4k cP
| |
| Ultra High Tear, in Xylene |
|
MED-6655
| | 72 h / R.T., H | 35 | 775 | 425 | 45 |
700
| |
| RTV Fluorosilicone Dispersion |
|
MED10-6655
| | 72 h / R.T., H | 35 | 775 | 425 | 45 |
700
| |
| RTV Fluorosilicone Dispersion |
|
MED-6670
| Platinum | 5 min / 150 | | | | |
| .96 |
| Low coefficient of friction silicone coating |
|
MED10-6670
| | 5 m / 150 | | | | |
| 0.96 |
| Low coefficient of friction silicone coating |
|
MED-6671
| | 24 H / R.T., H | | | | |
| |
| Low coefficient of friction silicone coating |
|
MED-6731
| | | | | | |
2000k cP
| 1.22 |
| Heavy consistency methyl fluoro grease |
|
CF1-6755
| Platinum | 30 M / 150 | 30 | 675 | 275 | 40 |
A:40k/B:35k
| 1.14 |
| Tough Elastomer |
|
MED-6755
| Platinum | 30 M / 150 | 30 | 675 | 275 | 40 |
A:40k/B:35k cP
| 1.14 |
| 1.46 R.I., Optically Clear |
|
R2-6755
| Platinum | 30 M / 150 | 20 | 550 | 325 | 25 |
A:48.5k/B:40k cP
| 1.14 |
| Better Adhesion to Polycarbonate |
|
MED-6820
| Platinum | 30 M / 150 | 40 | 640 | 175 | 35 |
A:70k/B:40k cP
| |
| 1.43 R.I., Optically Clear |
|
LS-6941
| Platinum | 15 M / 150 | 50 | 1300 | 100 | 20 |
A:6k/B:90 cP
| 1.03 |
| Low Viscosity |
|
LS1-6941
| Platinum | 30 M / 150 | 50 | 750 | 350 | 80 |
A:80k/B:42k cP
| 1.03 |
| Tough |
|
LS2-6941
| | 30 m / 150 | 30 | 120 | 100% | |
A:1.2k/B:800
| |
| solvent free, low viscosity, electrically stable |
|
LS-6943
| Platinum | 60 M / 100 | 40 | 900 | 120 | |
5.4k cP
| 1.03 |
| Scorch Time 1.87 min, T90 2.79 min |
|
LS-6946
| Platinum | 30 M / 150 | 30 | 700 | 275 | 35 |
A:38k/B:34k cP
| 1.14 |
| Primed Lap Shear 510 psi (3.5 MPa), Modulus 425 psi (2.9 MPa) |
|
S-7200
| | | | | | |
| 1 |
| Viscocity up to 7 million cps, Volatility 2% max |
|
S-7201
| Non-Curing | | | | | |
| 0.98 |
| Certified To Fed Spec VV-D-1078 |
|
S-7205
| | | | | | |
| |
| Kinematic Viscocity 0.62 cSt |
|
S-7400
| | | | | | |
| 1.01 |
| Low / High Temperature, Volatile Content 4% max |
|
S-7402
| | | | | | |
| 1.01 |
| High/Low Temperature Silicone Fluid |
|
PLY-7500
| Non-Curing | | | | | |
Various cP
| 1.01 |
| Vinyl Endblocked, Dimethyl |
|
PLY-7511
| Non-Curing | | | | | |
1000 cP
| 1.01 |
| Trimethyl Endblocked, Vinyl on Chain |
|
PLY-7531
| Non-Curing | | | | | |
450 cP
| |
| Vinyl Endblocked, Diphenyl |
|
PLY-7532
| Non-Curing | | | | | |
1.3k cP
| 0.99 |
| Vinyl Endblocked, Diphenyl |
|
PLY-7560
| Non-Curing | | | | | |
Various cP
| 1.01 |
| Vinyl Endblocked, Diphenyl |
|
PLY-7580
| Non-Curing | | | | | |
Various cP
| 1.28 |
| Vinyl Endblocked, Fluoro |
|
PLY-7600
| Non-Curing | | | | | |
Various cP
| 1.01 |
| Hydroxy Endblocked, Dimethyl |
|
PLY-7664
| Non-Curing | | | | | |
6.5k cP
| 1.16 |
| Vinyl Endblocked. High Phenyl |
|
PLY-7665
| Non-Curing | | | | | |
600 cP
| 1.08 |
| 1.52 Refractive Index |
|
PLY-7701
| Non-Curing | | | | | |
65k cP
| |
| 1.55 Refractive Index |
|
PLY-7801
| Non-Curing | | | | | |
7.5k cP
| 1.18 |
| Vinyl Endblocked, Fluoro |
|
PCM-7901
| Non-Curing | | | | | |
| 0.97 |
| Cytotoxicity tested |
|
PCM-7902
| Non-Curing | | | | | |
| 1.01 |
| 1.403 Refractive Index |
|
PCM-7904
| | | | | | |
350, 1000 and 12500
| 1.01 |
| Fluid, High / Low Temperaurte |
|
PCM-7905
| Non-Curing | | | | | |
| |
| Fluorosilicone Polymer |
|
PCM-7906
| Non-Curing | | | | | |
| |
| Methyl Fluoro Copolymer (Low Fluro) |
|
PCM-7907
| Non-Curing | | | | | |
| |
| Methyl Fluoro Copolymer (High Fluro) |
|
PCM-7908
| | | | | | |
30000 mPas cP
| 0.96 |
| A one-part, low percent solids (15%
dimethicone) blend of dimethicone and
cyclopentasiloxane |
|
PCM-7914
| | | | | | |
600000 mPas cP
| 0.94 |
| A one-part, dimethyl elastomer crosspolymer
dispersed in cyclopentasiloxane |
|
PCM-7916
| Non-Curing | | | | | |
575 cSt
| 1.08 |
| 1.52 Refractive Index |
|
PCM-7917
| Non-Curing | | | | | |
1.5k cSt
| 1.04 |
| 1.46 Refractive Index |
|
PCM-7918
| Non-Curing | | | | | |
65k cP
| 1.13 |
| INCI Designation: Aminopropyl Phenyl Trimethicone |
|
PCM-7919
| | | | | | |
1.5k
| 1.04 |
| INCI Designation: PEG/PPG-18/18 Dimethicone |
|
PCM-7926
| Platinum | 15 M / 150 | | | 500 | |
A:21k/B:16.5k cP
| 1.07 |
| Rapid RTV Cure |
|
PCM-7927
| Platinum | 15 M / 150 | | | | |
A:23k/B:18k cP
| |
| Low Viscosity |
|
PCM-7931
| Platinum | 1 H / 100 | | | | |
535 cP
| 0.98 |
| Medium Gel, Bulk Gel Hardness 10.0 mm |
|
PCM-7932
| Platinum | 5 H / 140 | | | | |
1000 cP
| 0.98 |
| Adjustable Penetration |
|
PCM-7933
| Platinum | 30 M / 140 | | | | |
A:10k/B:6k cP
| 0.97 |
| Firm Gel |
|
PCM-7949
| Non-Curing | | | | | |
3 cSt
| 0.95 |
| 99.5% D4 Content |
|
GEL-8100
| Platinum | 1 H / 100 | | | | |
535 cP
| 0.98 |
| Medium Gel, Bulk Gel Hardness 9.5 mm |
|
GEL-8150
| Platinum | 30 M / 100 | | | | |
500 cP
| 0.97 |
| Firm Gel, Penetration 5 mm |
|
GEL8-8150
| Platinum | 30 M / 100 | | | | |
500 cP
| 0.97 |
| High purity, optically clear, firm silicone gel. Penetration 4mm |
|
CV-8151
| Platinum | 30 m / 150 | | | | |
2.5k cP
| |
| Penetration 4 mm |
|
CV1-8151
| Platinum | 30 m/ 150 | | | | |
A:16k/B:8.5k cP
| |
| Penetration .4 mm |
|
GEL1-8155
| Platinum | 30 M / 150 | | | | |
14.5k cP
| |
| Firm Gel, Longer worktime, Penetration 0.4 mm |
|
GEL-8170
| Platinum | 90 M / 80 | | | | |
600 cP
| |
| High Purity, Volume Resistivity 1x10(15) ohm/cm |
|
GEL-8250
| Platinum | 30 M / 150 | | | | |
| |
| Low/High Temperature, Penetration 0.5 mm |
|
CV-8251
| Platinum | 40 m / 150 | | | | |
1.8k cP
| |
| Low/High Temperature, Penetration 3mm |
|
SIL-8500
| Non-Curing | | | | | |
| |
| Diphenyl Tetramer |
|
LS-8941
| | 30 m / 150 | 80 | 1,250 | 65 | 55 |
A:27.5k/B:2.5k
| 1.07 |
| Optically clear, high duro |
|
G-9000
| Non-Curing | | | | | |
| 1.11 |
| Medium Consistency Grease, 0.3% max volatiles |
|
G-9010
| Non-Curing | | | | | |
| 1.13 |
| Stiff Consistency Grease, 0.3% max volatiles |
|
MED-9011
| Non-Curing | | | | | |
100k cP
| 1.03 |
| Low Consistency Grease |
|
G-9020
| Non-Curing | | | | | |
| 1.08 |
| Medium Consistency Grease |
|
MED-9021
| Non-Curing | | | | | |
350k cP
| 1.08 |
| Medium Consistency Grease |
|
G-9030
| Non-Curing | | | | | |
| 1.12 |
| Stiff Consistency Grease |
|
MED-9031
| Non-Curing | | | | | |
1000k cP
| 1.10 |
| Heavy Consistency Grease |
|
G-9040
| Non-Curing | | | | | |
| 0.97 |
| Low Viscosity, Volatile Content 0.5% |
|
CV-9042
| Non-Curing | | | | | |
| 1.61 |
| Thermally Conductive |
|
MED-9050
| Platinum | | | | | |
| .94 |
| Dispersed Gel |
|
CV-9052
| Non-Curing | | | | | |
| 1.10 |
| Volume Resistivity 1x10(15) ohm-cm |
|
G-9200
| | | | | | |
| 1.12 |
| Stiff methly phenyl grease for applications requiring optical clarity |
|
G-9340
| Non-Curing | | | | | |
| 2.26 |
| Thermally Conductive |
|
CV-9341
| Non-Curing | | | | | |
| 2.30 |
| Thermally Conductive, dielectric constant 4.2@1kHz |